Sharp UX-600M User Manual
Page 97
Scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of transmit-
ted images and copies. Open the operation panel by pulling the front edge up
(grasp it at the PANEL RELEASE mark), and clean the scanning glass and
rollers as shown below.
Wipe the scanning glass, white back-
plate, and rollers with a soft cloth.
•
Make sure that all dirt and stains (such
as correcting fluid) are removed, as
these will cause vertical lines on trans-
mitted images and copies.
White
backplate
Document
rollers
Scanning glass
The housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
•
Do not use benzene or thinner. These solvents may damage or discolor the
machine.
Chapter 11 Maintenance
85