Sharp UX-600M - Manual (Page 27)

UX600U-IPSG RT
Ch
ap
te
r
2
Initial
Settings
Setup Guide
Before you can begin using your fax, there are some settings that must be made
with the keys on the operation panel. Some of the settings are required for basic
use of your fax, others may or may not be necessary depending on how you
want to use the fax. The procedures for making the settings are described in this
chapter in the order shown below.
Required settings:
♦
Entering your name and fax/telephone number in the fax
♦
Setting the fax to the current date and time
♦
Selecting the reception mode
Settings which may be necessary:
♦
Distinctive ring: If you subscribe to a distinctive ring service from your
telephone company (this is a service which allows you to use several differ-
ent devices, each with its own phone number and ring pattern, on one line),
you will want to select a ring pattern for your fax.
♦
Storing numbers for automatic dialing: Automatic dialing allows you to
dial a full fax or phone number by simply pressing a Rapid Key, or by
pressing the SPEED DIAL key and entering a 2-digit number. To use auto-
matic dialing, you must store the desired fax and phone numbers in the fax.
♦
Volume: Adjustment of the volume of the speaker, handset, and ringer.
15