Sharp UX-600M User Manual

Page 48

Batch Page Numbering

This setting is used to change the page numbering of the transmitted document
from simple numbering ("P.1", "P.2", etc.) to batch numbering, which means
that a slash and the total number of pages being sent are added after each page
number (for example, "P. 1/5", "P.2/5", etc.). This allows the receiver to check
for any missing pages.

♦

If you are sending a cover sheet, do not include the cover sheet in the total
number of pages. Your fax will adjust the number to include the cover
sheet automatically.

♦

If you need to cancel a batch number entry, remove the document from the
feeder or press the STOP key.

♦

If the number of pages actually transmitted does not coincide with the
batch number entered, the alarm will sound and PAGE COUNT ERROR
will appear in the display. "PAGE E." will also appear in the "NOTE" col-
umn of the Transaction Report if it has been set to print out.

Press the keys shown at right.
PAGE COUNTER SET will appear in
the display.

Enter the total number of pages ("01" to
"99") by pressing the number keys.

FUNCTION

(Example)

Chapter 3 Sending Documents