Sharp UX-600M - Manual (Page 76)

UX600MU-SFPO RT
Polling (Requesting a Fax Transmission)
Polling allows you to request another fax machine to send a document to your
fax machine. In other words, the receiving fax machine, not the transmitting fax
machine, initiates the transmission. You can use your fax to both poll and be
polled by others.
To use the polling function, you must first reset Rapid Key 15/POLL for use as
a polling key. This is done by resetting Option Setting 15, as described in Chap-
ter 9, "Optional Settings". (Note that when Rapid Key 15/POLL is set as a poll-
ing key, it cannot be used for Rapid Key Dialling.)
Requesting transmission
Note: Rapid Dial Keys cannot be used for polling. To dial a Rapid Dial loca-
tion, press the SPEED DIAL key and then enter the 2-digit number corre-
sponding to the Rapid Key.
1
Dial the fax machine you want to poll us-
ing one of the following methods:
•
Pick up the handset (or press the
SPEAKER key) and dial the full num-
ber. Wait for the fax answerback tone.
•
Press the SPEED DIAL key and enter
a 2-digit Speed Dial number.
•
Enter the full number using the nu-
meric keys.
(Example)
S P E E D
D I A L
0 1
2
Press Rapid Key 15/POLL.
•
If you used the handset, replace it
when POLLING appears in the display.
Reception will begin.
15/POLL
34
Chapter 8 Special Functions
64