Sharp UX-600M - Manual (Page 63)

Activating the hookup
Before you go out, activate the answering machine hookup as follows:
1
Set Option Setting 9, TAD CON-
NECTED, to YES:
•
Press the FUNCTION key and then
the "4" key. OPTION SETTING will
appear in the display.
•
Press the "#" key nine times.
TAD CONNECTED will appear in the
display.
•
Press "1" to select YES. (To deactivate
the hookup, press "2" for NO.)
•
Press the STOP key to return to the
date and time display.
2
Set the reception mode of your fax to
AUTO by pressing the RECEPTION
MODE key.
•
Important: For the hook-up to operate
properly, the reception mode of your
fax must be set to AUTO.
3
Set your answering machine to auto answer. It must answer on no more
than two rings (if not, you may not be able to receive faxes sent by automat-
ic dialing).
•
If your answering machine has a toll saver function, make
sure that it will answer by the fourth ring.
4
When you return and turn off your answering machine, you must set TAD
CONNECTED to NO (see Step 1 above) if you will be using your fax in
AUTO reception mode. If you will only be using MANUAL reception
mode, you can leave TAD CONNECTED set to YES.
Note: The call counter on your answering machine may indicate that voice
messages were received, when only fax messages were received.
RECEPTION
MODE
STOP
FUNCTION
4
1
Chapter 7 Answering Machine Hookup
51