Sharp UX-600M User Manual
Page 17
9
Close the print compartment cover, mak-
ing sure it clicks into place.
•
Caution! Close the cover slowly to
make sure it doesn’t pinch your fingers.
10
If you replaced the film, initialize the
new film by pressing the FUNCTION
key, the "6" key, and the "#" key on the
operation panel. Make sure that INITIAL-
IZE FILM appears in the display, and
then press the START key. (Do not per-
form this step if you installed the initial
sample roll of film.)
FUNCTION
6
START
When to replace the imaging film
The sample roll of imaging film provided with your fax is capable of printing ap-
proximately 65 pages of letter size paper. When it is used up, FILM END will
appear in the display. Replace it with the following imaging film, which is avail-
able at your dealer or retailer.
UX-15CR Imaging Film
One roll of UX-15CR imaging film is capable of printing approximately 500
pages of letter size paper when printed continuously.
Caution!
The text of documents printed with the imaging film is visible on the used
film. If confidential information has been printed, dispose of the film
appropriately.
Chapter 1 Installation
5