Sharp UX-600M - Manual (Page 33)

UX600MU-IPSD RT
Setting the Date and Time
The date and time appear in the display and reports, and are printed at the top of
every page you transmit. Set the date and time by pressing the keys on the opera-
tion panel as shown below.
♦
To correct a mistake, press the SPEED DIAL key to move the cursor back
to the mistake, and then enter the correct number.
1
Press the FUNCTION key and then the
"3" key. ENTRY MODE will appear in
the display.
2
Press the "
*" key three times.
DATE & TIME SET will appear in the
display.
3
Press the START key.
4
Enter a two-digit number for the month
("01" for January, "02" for February,
"12" for December, etc.).
(Example: January)
5
Enter a two-digit number for the day
("01" to "31").
(Example: the 5th)
6
Enter the last two digits of the year.
(Note: In the year 2000, "00" will appear
for the year.)
(Example: 1997)
7
Enter a two-digit number for the hour
("01" to "12") and a two-digit number
for the minute ("00" to "59").
(Example: 9:25)
FUNCTION
START
3
0 1
0 5
9 7
0 2 5 9
Chapter 2 Initial Settings
21