Sharp UX-600M - Manual (Page 25)

Loading Printing Paper
The paper tray holds the paper on which received documents and copies are
printed. Up to 200 sheets of letter or legal size paper from 16 to 20 lbs. (60 to 75
g/m
2
) can be loaded in the tray. Less sheets can be loaded when using heavier
paper. The maximum allowed paper weight is 24 lbs. (90 g/m
2
).
Note: When receiving or copying documents, do not allow more than 100
pages to collect in the received document outlet. Otherwise, the outlet may be-
come obstructed, causing paper jams.
1
Remove the paper cover if it is on the pa-
per tray.
•
If you are going to load legal size pa-
per, flip up the paper tray extender.
2
Fan the paper, and then tap the edge
against a flat surface to even the stack.
3
Pull the paper release plate toward you
and insert the stack of paper into the tray,
print side down.
•
If paper remains in the tray, take it out
and combine it into a single stack with
the new paper before adding the new
paper.
Chapter 1 Installation
13