Sharp UX-600M - Manual (Page 58)

3
Press "1" (MULTI COPY) if you don’t
want the copies sorted, or "2" (SORT
COPY) if you want them sorted.
4
Enter the desired number of copies with
the number keys.
•
If the desired number of copies is from
1 to 9, enter "0" first.
•
If you don’t want to make a reduction
or enlargement setting, press the
START key. Copying will begin.
5
Set the amount of reduction or enlarge-
ment by entering a number from "1" to
"5" as shown below. Copying will begin.
1: AUTO (automatic size adjustment to
match the size of the printing paper)
2: 50%
3: 100% (no reduction or enlargement)
4: 125%
5: 135%
Note: If you place a large number of originals in the feeder, the memory may
become full before all of them can be scanned (MEMORY IS FULL will ap-
pear in the display). If this happens, press the START key to copy the origi-
nals which have been scanned, and then repeat the copy procedure for the
remaining originals, including the original which was being scanned when the
memory became full.
2
1 2
(Example)
(Example)
Multi Sort
2 or 1
Chapter 5 Making Copies
46