Sharp UX-600M - Manual (Page 85)

Using a Program key
A programmed operation is performed as follows:
1
Load the document.
2
Press the appropriate Program Key.
Note: A maximum of 2 timer operations can be set at any one time, including
both timer operations set by pressing a Program Key and operations set as de-
scribed in "Timer Operations" in this chapter.
To cancel a programmed timer operation
If a Program Key has been pressed for a timer operation and you need to cancel
the operation before it is performed, follow these steps:
1
Press the Program Key.
2
Press the START key.
START
16/P1
35
(Example)
16/P1
35
(Example)
Chapter 8 Special Functions
73