Sharp UX-600M - Manual (Page 19)

TEL.
SET
TEL.
LINE
3
Connect the handset as shown and
place it on the handset rest.
4
Insert one end of the telephone line
cord into the TEL. LINE jack. In-
sert the other end into a standard
(RJ11C) single-line telephone wall
jack.
Be sure to insert the telephone line
cord into the TEL. LINE jack. Do
not insert it into the TEL. SET
jack.
Note: Your fax is set for touch-tone dialing. If you are on a pulse dial (rotary)
line, you must set the fax for pulse dialing by changing Option Setting 8. This
procedure is described in Chapter 9, "Optional Settings".
Handset
Wall jack
Chapter 1 Installation
7