Samsung CLP-510 Series User Manual
Page 66
U
SING
THE
C
ONTROL
P
ANEL
2.13
2
IP Address
You can select this item only when you
set
IP Get Method
to
Static
. This item
lets you enter the IP address manually.
Press the scroll button to set the value of
the 1st byte between 1 and 255, and
then press the
Enter
button.
Set the value for the 2nd, 3rd, and 4th
byte the same way.
Subnet Mask
You can set this item only when you set
IP Get Method
to
Static
. This item lets
you enter the subnet mask manually.
Press the scroll button to set the value of
the 1st byte between 1 and 255, and
then press the
Enter
button.
Set the value for the 2nd, 3rd, and 4th
byte the same way.
Gateway
You can set this item only when you set
IP Get Method
to
Static
. This item lets
you enter the gateway manually. Press
the scroll button to set the value of the
1st byte between 1 and 255, and then
press the
Enter
button.
Set the value for the 2nd, 3rd, and 4th
byte the same way.
Config 802.11b
Configure the wireless network
environments.
If you select Yes, the following options
are available: SSID, Operation Mode,
Channel, Authentication,
Encryption, Using Key, Key Type,
and Key1~Key4.
See “Configuring the Wireless Network”
Note: This menu only appears when an
optional wireless network interface card
has been installed.
Item
Explanation
Values: Yes, No*