Samsung CLP-510 Series - Manual (Page 171)

S OLVING P ROBLEMS
7.4
Paper does not
feed into the
printer.
Paper has been loaded
incorrectly.
Remove paper from the tray and reload it
correctly.
Check that the paper size adjusters are set
correctly.
There is too much
paper in the paper tray.
Remove excess paper from the tray.
The paper is too thick. Use only paper that meets the specifications
required by the printer.
Print job is
extremely slow.
The job may be very
complex.
Reduce the complexity of the page(s) or try
adjusting the print quality settings.
Adjust the print quality settings, such as
reducing the resolution. If you have set the
resolution to 1200 dpi [Best], change it
to 600 dpi [Normal].
Change the port setting to the USB or
network port to improve print speed.
Your printer prints A4-sized paper at 24
ppm and letter-sized paper at 25 ppm in
black & white mode. In color mode, A4/
letter-sized paper prints at 6 ppm.
If using Windows 9x/
Me, the Spooling
Setting may be set
incorrectly.
From the Start menu, choose Settings and
Printers. Right-click the Samsung CLP-
510 Series printer icon, choose
Properties, click the Details tab, and then
choose the Spool Settings button. Select
the desired spool setting.
Half the page is
blank.
The page orientation
setting may be
incorrect.
Change the page orientation in your
application. See page 4.6.
The paper size and the
paper size settings do
not match.
Ensure that the paper size in the printer
driver settings matches the paper in the
tray.
Or, ensure that the paper size in the printer
driver settings matches the paper selection
in the software application settings you use.
Problem Possible Cause Solution