Samsung CLP-510 Series - Manual (Page 18)

S ETUP G UIDE
18
For Network Printing
You can attach your CLP-510 or CLP-510N printer to a network
using an Ethernet cable (UTP cable with RJ.45 connector).
The CLP-510N has a built-in network interface card. If you are a
CLP-510 user, you need to install an optional network interface card.
If you want to use the printer in both wired and wireless network
environments, you need to install an optional wired/wireless
network interface card. For details about installing the card, see
your printer’s User’s Guide on the CD-ROM.
Using an Ethernet cable
1 Make sure that both the printer and the computer are
turned off.
2 Plug one end of the Ethernet cable into the Ethernet
network port on the printer.
3 Plug the other end of the cable into a network LAN
connection.
For details about installing a network card, see your
printer’s User’s Guide on the CD-ROM.
To the network
LAN connection