Siemens HIPATH 8000 User Manual
Page 70
Step by step
Enhanced phone functions
70
Deflecting a second call
Prerequisite: You are conducting a call and call waiting
is allowed (
In the pop-up menu:
Select and confirm the option shown.
j
Enter and confirm the phone number.
The second call is deflected to the destination speci-
fied. You are reconnected with the first party.
Connecting parties
Select and confirm the option shown in the active con-
nection’s context menu. The other two parties are now
connected to one another. You can now hang up or dial
another number for instance.
or
Connect by hanging up
Prerequisite: Connecting by hanging up is activated
(ask your administrator) and "Switch assignment" must
be set to "Yes" (
page 71). Before you can be connect-
ed by hanging up you must have toggled at least twice
(
]
or
n
Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call waiting
Prerequisite: The option was programmed by your ad-
ministrator.
z You can also configure this setting via the Web interface
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Deflect
Complete Xfer
If the Call waiting (second call) function is deacti-
vated, a caller hears the busy signal if you are al-
ready conducting a call.
Settings
User