Siemens HIPATH 8000 - Manual (Page 51)

Programmable sensor keys
51
Step by step
Programming sensor keys
z You can also configure this setting via the Web interface
page 184.
Beginning programming
Directly via a sensor key
S
Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed.
Confirm to begin programming. The sensor key illumi-
nates continuously.
or Via the user menu
You can also program keys via the user menu.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.
j
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted
to press the key you wish to program.
S
Press the sensor key you want to program with a func-
tion. The sensor key illuminates continuously.
If the prompt is not displayed or a programmed
function is not executed, then you can only
launch key programming via the user menu (ask
your administrator about the current setting).
OK
Settings
User
Phone
Program keys