Siemens HIPATH 8000 User Manual

Page 180

Step by step

Call recording

180

Your call is included in a conference during
the recording.

Prerequisite: You are conducting a call that is being
recorded. You are to be included in a conference by your
call partner. You are placed on hold while the
conference is being set up.

You hear the music on hold while your call partner is
setting up the conference. The recording is paused and
the recording symbol

has disappeared from the

display.

[

Your call partner answers again and you are connected
to the conference. You hear a beep and the recording
symbol

is shown in the "Conference" line. The

conference call is now being recorded.

Putting a line on hold manually during the
recording

There are two options for placing a line manually on
hold:
•

You place the active line on hold during the call
recording and then resume the call on this line.

•

You seize a different line during call recording. The
first line is placed on manual hold.

Prerequisite: The telephone has more than one line
configured. The active line is being recorded. The
recording button LED is lighting.

Holding and retrieving the call on the line

[

You are conducting a call, for example on line A. You
hear a beep and the recording symbol

is shown on

the display. The call is now being recorded.

Press line key A. The line key LED starts flickering. The
call is placed on hold. The recording is paused while the
call is on hold. The recording symbol

on the display

disappears.