Siemens HIPATH 8000 - Manual (Page 129)

OpenScape Voice functions
129
Step by step
Making anonymous calls
Your administrator decides whether or not your caller ID
(name and phone number) is displayed on a called par-
ty’s station.
Anonymous calling is when your data is
not transmitted. The settings configured can be deacti-
vated, however, for specific calls.
Deactivating
If your administrator permanently activated anony-
mous calling for your phone, you can deactivate this
setting as follows:
^
Lift the handset.
j
Enter the code (see the table of codes page 148) to
transmit the caller information.
Z
You hear a confirmation tone.
Activating
If your administrator activated caller ID transmission for
your phone, you can deactivate this setting as follows:
^
Lift the handset.
j
Enter the code (see the table of codes page 148) to
suppress the caller ID.
Z
Wait until you hear the confirmation tone.
Caller ID transfer is suppressed. "Private/Anonymous"
appears on the called party’s display instead of the call-
er ID.
• If your caller ID is transmitted: your caller ID is
displayed.
• If your caller ID is suppressed: "unknown" is
displayed.