Siemens HIPATH 8000 - Manual (Page 175)

Call recording
175
Step by step
Manual call recording
Activating or deactivating call recording when the
telephone is in idle mode.
Prerequisite: Manual mode is selected. The recording
button is configured and indicates the status.
Select the option shown in the telephone's context
menu to enable the option.
or disable the option.
or
S
Press the recording button to enable the option - the
LED key lights up.
R
or press the key shown to disable the option - the LED
extinguishes.
The recording button also indicates the status change if
you activated or deactivated call recording via the
context menu.
Call recording with AutoStart
Standby mode is activated in principle in idle mode. The
recording button LED lights up. You cannot switch off
the recorder. As soon as a call is set up, call recording
starts automatically.
^
Lift the handset.
or
n
Press the key shown.
[
The station answers. You hear a beep, the recording
symbol |
is shown on the display and the recording
button LED remains lighting. The call is now being
recorded (see also
page 172)
You can pause the recording at any time and continue it
again.
]
or
n
If you end the call, the AutoStart process is set up again
for the next call.
Recording on
Recording off