Siemens HIPATH 8000 - Manual (Page 177)

Call recording
177
Step by step
Consultation during call recording
Prerequisite: You are conducting a call. Recording has
started. The recording button LED is lighting.
You initiate a consultation – your main call is placed on
hold as a result while the consultation is being
performed.
j
The recording is paused while you initiate the
consultation. The recording symbol |
on the display
disappears.
[
If the consultation partner answers, the consultation
call is recorded. You hear a beep and the recording
symbol
|
is shown on the display again.
You can now terminate the consultation call or for
example switch back to the first call party (alternate)
while the consultation call is placed on hold.
Second call during call recording
Prerequisite: You are conducting a call. Recording has
started. The recording button LED is lighting.
[
You are conducting a call. You hear a beep and the
recording symbol |
is shown on the display. The call
is now being recorded.
A second call party camps on page 68.
In the pop-up menu:
Select and confirm the option shown.
You are connected with the second party. You hear a
beep and the recording symbol
|
is shown in the line
for the second call – this call is now being recorded. The
first party is placed on hold.
Accept