Siemens HIPATH 8000 - Manual (Page 138)

Step by step
OpenScape Voice functions
138
is informed that the call is being routed to another sta-
tion. The connection is established with the first phone
that accepts the call.
If the call is not answered by any phone, it is forwarded
to the configured forwarding destination (on no reply) or
to a "rejection announcement".
Parallel call
Managing number lists/activating parallel call
Before the parallel call feature can be activated, a paral-
lel call list must be created. This can be prepared either
by administrator or you can create it yourself later. Up to
six numbers can be entered in the list for sites on which
incoming calls including your main number should be
signaled sequentially. Each number can consist of up to
30 digits.
^
Lift the handset.
j
Enter the code for the edit mode (see code table
page 148).
The edit mode opens and you hear an announcement
with the following information:
•
Feature name
• Current status (active/inactive)
• Number of numbers currently on the parallel call list
You are prompted to do one of the following:
•
Activate/deactivate the feature (only if numbers are
already entered in the list)
• Call up the numbers currently entered in the list.
• Add or delete numbers
• Repeat the options in edit mode
If the parallel call list is still empty, you are prompted to
enter numbers in the list. As soon as you have entered
a valid number, the parallel call can be activated.
If the parallel call is activated, incoming calls are routed
to your phone and all other destination phones in the
parallel call list. The connection is established with the
first phone that accepts the call.
If the call is not answered by any phone, it is forwarded
to the configured forwarding destination (on no reply) or
to a "rejection announcement".