Juniper Networks ERX-1410 - Manual (Page 37)

2
Installing the ERX
System
This chapter provides procedures for installing the ERX-1400 series and
the ERX-700 series either as freestanding devices or in a distribution
rack.
Before You Begin
Before you begin unpacking the system, be sure you have the following
items:
• A No. 2 Phillips screwdriver
• A utility knife
Unpacking the ERX-1400 Series
The ERX-1400 series come boxed, bolted, and strapped to a skid. See
Figure 2-1 .
For your convenience, we recommend that you unpack the ERX system
in the location where you want to install it.
Topic Page
Before You Begin 2-1
Unpacking the ERX-1400 Series 2-1
Unpacking the ERX-700 Series 2-4
Freestanding Installation 2-5
Rack-Mounted Installation 2-6
The Next Step 2-10