Juniper Networks ERX-1410 - Manual (Page 127)

Performance Specifications
ERX Edge Routers
B-5
cOC12/STM4 F0
(single mode and multimode,
multimode with and without
SONET APS redundancy) OC12/STM4
OC3/STM1
DS3
T1, E1
DS0
HDLC Framing • 1:N redundancy
• SONET APS redundancy a
130 W
CT1 DS1, DS0
HDLC Framing 1:N redundancy 40 W
CT3 DS3, DS1, DS0
HDLC Framing 1:N redundancy 60 W
CT3 12 F0 DS3, DS1, DS0
HDLC Framing 1:N redundancy 130 W
E3 ATM ATM/AAL5 1:N redundancy 60 W
E3 FRAME
(3 ports) E3
HDLC Framing 1:N redundancy 60 W
E3 FRAME
(12 ports) E3
HDLC Framing N/A 135 W
FE-2 Ethernet
(IEEE 802.3)
10/100Base-T N/A 60 W
FE-8 Ethernet
(IEEE 802.3)
10/100Base-T N/A 130 W
Gigabit Ethernet Ethernet
(IEEE 802.3z)
1000 Base-SX
1000 Base-LH
1000 Base-ZX Redundant port 130 W
HSSI Up to 44.736 MHz
data rate
HDLC N/A 60 W
IPSec Service IPSec Tunnels Multiple IPSec Service
modules provide redundancy 130 W
OC3 (dual port) OC3c/STM1
ATM/AAL5
HDLC Framing N/A 60 W
OC3/STM1 ATM
(single mode and multimode) OC3/STM-1,
ATM:AAL5 1:N redundancy 130 W
Table B-2 Performance specifications for module assemblies (continued)
Name Capability Redundancy Support Power Use