Juniper Networks ERX-1410 - Manual (Page 25)

The ERX System
ERX Edge Routers
1-5
The ERX-705 chassis is the same as the ERX-700 chassis (see Figure 1-3
and Figure 1-4 ). The chassis contains seven slots to accommodate
modules. Installation procedures and operating procedures are identical
for both systems. All ERX systems use the same SRP I/O modules.
Note: The system may look different from the systems shown in the figures in this
chapter, depending on the line modules in the slots.
Figure 1-3 ERX-700 series front view
Figure 1-4 ERX-700 series rear view
SRP module (slot 0)
OC3 line module (slot 6)
Ejector
Flange
Redundant SRP module (slot 1)
PCMCIA slot
T3 ATM line modules
CT3 line modules
OC3 I/O module
CT3/T3 I/O modules
SRP I/O module Power switches
Power input module