JVC BD-X201MS - Manual (Page 73)

E-73
Setup Menu
RECORDER MENU Screen
The following table identifies and describes the parameters that may be set using the RECORDER screen.
Top half
: Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ]
: Default setting
RECORDER MENU (1/2) screen
Parameter Possible settings Description
CHAPTER
CREATION [MANUAL]
AUTO
This parameter is used to indicate whether or not chapters are to be created automatically at set
intervals while recording.
MANUAL
: Chapters are not to be created automatically.
Use this setting when chapters are to be set manually.
AUTO : Chapters are to be created at set intervals during recording.
The SET INTERVAL parameter below is used to specify this interval.
CHAPTR [MANU]
AUTo
SET INTERVAL Every01min
z
[Every05min]
z
Every59min
This parameter becomes active whenever CHAPTER CREATION has been set to AUTO.
It is used to set the time interval for automatic chapter creation and is set in units of minutes.
INTERV 1
z
[5]
z
59
AUTO CHAPTER
(REC PAUSE) OFF
[ON]
Select whether to automatically insert a chapter mark during a recording pause.
OFF
: Do not insert a chapter mark.
ON : Insert a chapter mark. ATCHAP oFF
[oN]
ENCODE
QUALITY UXP (NOT DVD
VIDEO)
XP
[SP]
LP
EP
DLP
DEP
For setting the recording quality. Recording quality and time vary with the set values as follows:
(When using a 4.7 GB disc)
* Only UXP, XP or SP can be selected when the AUDIO ENCODE item is set to LPCM.
qUALTY UXP
XP
[SP]
LP
EP
dLP
dEP
AUDIO ENCODE NO AUDIO
LPCM
[DOLBY DIGITAL]
MPEG
This parameter is used to set the encoding format for audio data.
NO AUDIO
: Do not record audio sound. The recording time will be longer as sound re-
cording is not performed.
LPCM : Linear PCM encoding (Non-compressed)
DOLBY DIGITAL : Dolby AC3 encoding (Compressed)
MPEG
: MPEG encoding (Compressed)
Notes
• Only UXP, XP or SP on the ENCODE QUALITY item can be selected when the
AUDIO QUALITY item is set to LPCM.
• The MPEG set values can be displayed and selected when the TV TYPE item on
the SYSTEM MENU (2/2) screen is set to PAL.
A ENC oFF
LPCM
[dd]
MPEG
r This button is used to display the RECORDER MENU (2/2) screen.
REC2
MENU
This button is used to return to the Setup Menu screen.
MENU
Set Value Recording Time Picture Quality Upload Size
UXP
(NOT DVD VIDEO) 40 mins High
x
Normal
y
D1 : NTSC = 720 × 480 dots
PAL = 720 × 576 dots
XP 60 mins
SP 120 mins
LP 180 mins
EP 240 mins
DLP 360 mins Low
y
HalfD1: NTSC = 352 × 480 dots
PAL = 352 × 576 dots DEP 480 mins