JVC BD-X201MS - Manual (Page 70)

E-70
Setup Menu
SYSTEM MENU Screen (continued)
SYSTEM MENU (2/2) Screen (continued)
Parameter Possible settings Description
EE OUTPUT [THROUGH]
MUTING
This parameter is used to select whether to output E-E images from the VIDEO OUT terminal
when in Stop or Recording mode.
THROUGH : Outputs E-E images.
MUTING
: Outputs black images. Set this setting when you want to prevent a loop connection
being used when connected to ultrasound diagnostic equipment.
* The on-screen display is output for any of these settings.
EE oUT [THR]
MUT
DIGITAL STILL OFF
[FRAME]
1st
2nd
This parameter is used to select whether to use the frame memory of the DVD recorder to set
digital still mode when the DVD recorder enters Still mode.
OFF
: The frame memory of the DVD recorder is not used.
FRAME : The frame memory of the DVD recorder is used for outputting the frame still image.
1st : The frame memory of the DVD recorder is used for outputting the 1st field still im-
age.
2nd : The frame memory of the DVD recorder is used for outputting the 2nd field still im-
age.
STILL oFF
[FRM]
1ST
2Nd
PLAYBACK
NAVIGATION OFF
[ON]
This parameter is used to select whether to use the navigator function when playing back a disc
that has been finalized by the DVD recorder.
OFF
: The navigator function is not used. Operation is performed in the same manner as
during playback of an unfinalized disc.
ON : The navigator function is used. Operation is performed in accordance with the set-
ting of TITLE END of the DVD MENU screen.
NAVI oFF
[oN]
BACK Returns to the SYSTEM MENU (1/2) Screen.
bACK