beautypg.com

IBM RS/6000 44P User Manual

Page 70

background image

The following is an example of the System Environmental Conditions screen:

System Environmental Conditions
(System Power is currently off.)

Fan 0: A stopped fan detected
Fan 1: A stopped fan detected
Fan 2: A stopped fan detected
Fan 3: A stopped fan detected
MEM Temperature is operating within normal tolerances
I/O Temperature is operating within normal tolerances
CPU Temperature is operating within normal tolerances
5.0 Volts: A low 5.0 Voltage reading detected
3.3 Volts: A low 3.3 Voltage reading detected
5.0 Standby Volts: is operating within normal tolerance
+12.0 Volts: A low +12.0 voltage reading detected
-12.0 Volts: A high -12.0 voltage reading detected

(Press Return to Continue)

v

Processor Configuration/Deconfiguration Menu

Use this option to view and modify processor configuration.

The following is an example of the Processor Configuration/Deconfiguration Menu:

Processor Configuration/Deconfiguration Menu

Processor number

0. Configured by system (0x0)
1. Configured by system (0x0)
2. Configured by system (0x0)
3. Configured by system (0x0)
98. Return to Previous Menu

To change the configuration, select the processor number
1>

The user can manually configure or deconfigure any processor, regardless of failure
status, through this Service Processor menu. The configuration process takes place
during the system power-up. Therefore, the configuration displayed in STANDBY
mode reflects the configuration during the last boot.

To view the current configuration, access the Service Processor menu after the
system starts. When the user selects a processor, its state toggles between
configured and deconfigured. Processors that are not present are not listed. A
processor can be in any of the following four states:

Configured by system: The processor is present, and has not exceeded the

number of failure threshold. It is configured by the system and is available.

Deconfigured by system: The processor is present, but has exceeded the

number of failure threshold. It is deconfigured by the system and is currently
unavailable.

Manually configured: The processor is present and available. It is configured by

the user through the service processor menus.

Manually deconfigured: The processor is present, but unavailable. It has been

deconfigured by the user through the service processor menus.

52

44P Series Model 170 User’s Guide