Loading a compact disc – IBM RS/6000 44P User Manual

Page 35

Loading a Compact Disc

To load a compact disc into the drive, do the following:

1. Press the Load/Unload button to open the tray. The tray slides out of the drive.

2. Place the compact disc in the tray with the label facing up.

3. Press the Load/Unload button, or gently push in the tray, to close the tray.

Note: Be sure that none of the vertical retaining tabs are extended when you use the

drive in the horizontal position.

Chapter 2. Using the 44P Series Model 170