IBM RS/6000 44P - Manual (Page 103)

Spin Delay
Select this icon to change the spin-up delay for SCSI hard disk drives attached to your
system. Spin-up delay values can be entered manually or you can use a default setting.
All values are measured in seconds. The default is two seconds. After you have entered
the new Spin-up delay values, use the arrow keys to highlight the Save icon and press
Enter.
ErrorLog
Selecting this icon displays the log of errors that your system unit has encountered
during operations.
Save Exit Default
Enter New Value (>1)
Current Spin Up Value - 2
(SEC)
Chapter 4. System Management Services 85