IBM RS/6000 44P - Manual (Page 33)

Front View of CD-ROM Drive
1 Compact Disc Tray
2 Emergency Eject Hole
3 Headphone Jack
4 Volume Control
5 Status Light
6 Load/Unload Button
Understanding the Status Lights
The status lights indicate the operational status of the drive. The various conditions are
explained below.
If light is: Condition is:
Off Drive is in standby mode with or without a disc loaded.
Blinking (green) Any of the following:
v Drive tray is inserted. The light blinks while the drive
completes the initialization checkout.
v Drive is reading data. The light blinks while data is being
read.
v Drive is in Play Audio Mode. The light blinks while the audio
is playing.
On (amber) Hardware error condition found during initialization.
Note: If this occurs, contact your service representative.
1 2
5 6 4 3
Chapter 2. Using the 44P Series Model 170 15