beautypg.com

Sample file modem_f.cfg – IBM RS/6000 44P User Manual

Page 200

background image

error:

# Handle unexpected modem

# responses.

expect "8\r" or "7\r" or "6\r" or "4\r" or "3\r"

delay 2

done

Sample File modem_f.cfg

#

# COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP F

#

# FUNCTIONS: Modem configuration file for many recent Hayes* compatible modems.

# This example uses the AT&F reset command to choose the factory defaults.

# This set up is preferred for modems with extended (&) commands. For early

# vintage modems, setup Z or Z0 is recommended. If your modem responds to

# the extended (&) commands and to factory default choices (&Fn), setup file

# F0 or F1 is recommended.

#

# * Trademark of Hayes Microcomputer Products, Inc.

#

# (C) COPYRIGHT International Business Machines Corp. 1996

# All Rights Reserved

# Licensed Materials - Property of IBM

#

# US Government Users Restricted Rights - Use, duplication or

# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

#

#

# If the modem has configuration switches, they should be set to the

# factory default settings.

ICDelay 1

DefaultTO 10

CallDelay 120

# AT Attention Code

,

Inserts delay in dialing commands

# &F Reset to default profile Q0

Turn on responses

# E0 Turn echo off

Q1

Turn off responses

# V0 Use numeric responses

S0=0 Automatic answer inhibit

# +++ Escape to command mode

S0=2 Answer on second ring

# H0 Hang-up

X0=0 Limit modem response codes

#

T = Tone mode. When used as T\r, it is a

#

no op to maintain program synchronization

#

when modem may/will echo the commands.

#

# &C1 Detect CD

&D2 Respond to DTR (often the default)

#

# %N Call-Out phone number

%P

Paging phone number

# %S Modem speed (available to users)

#

# Following are common responses from a wide range of modems:

# 16, 15, 12, 10, 5 and 1 are connection responses. Add others as required.

# 7=busy; 6=no dial tone; 4=error; 3=no carrier; 2=ring; 0=OK

#

# PROGRAMMING NOTE: No blanks between double quote marks (").

condout:

send "AT&FQ0T\r"

# Reset to factory defaults.

182

44P Series Model 170 User’s Guide