IBM RS/6000 44P - Manual (Page 119)

To change IP Parameters, type the number of the parameters for which you want to
change the value.
Attention: If the client system and the server are on the same subnet, set the
gateway IP address to [0.0.0.0].
Selecting the Adapter Parameters option allows you to view an adapter’s hardware
address, as well as configure network adapters that require setup. A screen similar to
the following displays.
Selecting an adapter on this screen displays configuration menus for that adapter:
IP Parameters
1. Client IP Address [000.000.000.000]
2. Server IP Address [000.000.000.000]
3. Gateway IP Address [000.000.000.000]
4. Subnet Mask [255.255.255.000]
.------.
|X=Exit|
′------'
===>
Device Slot Hardware Address
1. ethernet 3 0004AC5E08D2
2. token-ring 5 0020357A0530
3. ethernet Integrated 0004ACE4020B
.------.
|X=Exit|
′------'
(Press enter after making selection) ===>
Chapter 4. System Management Services 101