IBM RS/6000 44P - Manual (Page 108)

To use this screen, do the following:
1. Use the arrow keys or mouse to highlight an adapter to configure.
2. Press the spacebar to select the adapter.
3. Highlight the Ping icon and press Enter to send the test transmission.
Config
The Config icon allows you to configure network adapters which require setup.
Selecting the Config icon causes a list of the adapters requiring configuration to
display.
To use this screen, do the following:
1. Use the arrow keys or mouse to highlight an adapter to configure.
2. Press the spacebar to select the adapter.
3. Highlight the OK icon and press Enter.
Exit
Token Ring, slot #=4
ethernet, (Integrated)
Ping
90 44P Series Model 170 User’s Guide