IBM RS/6000 44P - Manual (Page 115)

Restore Default Settings: Restores the boot list to the default device of:
1. Primary diskette drive
2. CD-ROM drive
3. Tape drive
4. Hard disk drive
5. Network device.
Attention: To change the custom boot list back to the default values, select the
Default. If you change your startup sequence, you must be extremely careful when
performing
write operations (for example, copying, saving, or formatting). You can
accidentally overwrite data or programs if you select the wrong drive.
Configure Nth Boot Device
In the description below, Nth can be 1st, 2nd, 3rd, etc. depending on your choice on
the previous menu.
Options display a screen similar to the following:
Current Boot Device
1. Diskette
2. Ethernet (Integrated)
3. SCSI CD-ROM
id=3 (slot=1)
4. SCSI 4.5 GB Hard Disk id=6 (slot=1)
5. SCSI 4.5 GB Hard Disk id=5 (slot=5)
.------.
|X=Exit|
′------'
Chapter 4. System Management Services 97