IBM B50 - Manual (Page 85)

Remote Initial Program Load Setup
This option allows you to enable and set up the remote startup capability of your
server. You must first specify the network parameters as shown in the following
screen:
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
.------.
|X=Exit|
------'
===>
Selecting the IP Parameters option displays the following screen:
IP Parameters
1. Client IP Address [ . . . ]
2. Server IP Address [ . . . ]
3. Gateway IP Address [ . . . ]
4. Subnet Mask [ . . . ]
.------.
|X=Exit|
------'
===>
Chapter 3. Using System Management Services 3-33