IBM B50 - Manual (Page 111)

8. Reinstall any adapters you removed into their original connectors. (If you need
further information for installing adapters, see “Installing Adapters” on
page 4-23).
9. Go to “Device Records” on page A-2 and update the server memory information.
Return here to continue.
What to do next?
To enable or disable:
The privileged-access password, go to page 4-11.
The automatic power-up feature, go to page 4-13.
The power-on password, go to page 4-8.
The external SCSI connector, go to page 4-33.
To install:
A memory module, go to page 4-16.
An adapter, go to page 4-23.
An internal drive, go to page 4-29.
A new battery, go to page 4-36.
To remove:
An adapter, go to page 4-26.
A memory module, go to page 4-20.
An internal drive, go to page 4-29.
To complete the installation, go to page 4-39.
Chapter 4. Installing and Removing Options 4-19