IBM B50 - Manual (Page 136)

General Attributes Always Required
The following general attributes are the default settings for the diagnostics. Be sure
your terminal is set to these attributes.
Note: These attributes should be set before the diagnostics are loaded.
Refer to the following table.
General
Setup
Attributes 3151
/11/31/41
Settings 3151
/51/61
Settings 3161/
3164
Settings Description
Machine mode 3151 3151
PC 3161
or
3164 The diagnostics are set to
emulate use of the 3161 ASCII
Display Terminal. If your
terminal can emulate a 5085,
3161, or 3164 terminal, use
the attribute settings in this
table. Otherwise, refer to your
operator's manual, compare
the attribute setting
descriptions in this table with
those of your terminal, and set
your attributes accordingly.
Generated
Code Set ASCII
Screen Normal Normal Uses the EIA-232 interface
protocol.
Row
and
filemn 24 x 80 24 x 80 Uses the EIA-232 interface
protocol.
Scroll Jump Jump Jump When the last character on the
bottom line is entered, the
screen moves down one line.
Auto LF Off Off Off For the "On" setting, pressing
the Return key moves the
cursor to the first character
position of the next line. For
the "Off" setting, pressing the
Return key moves the cursor
to the first character position of
the current line. The CR and
LF characters are generated
by the New line setting.
5-4 7046 Model B50 User's Guide