IBM B50 - Manual (Page 63)

Password
When you select this icon, the following screen is displayed.
Power-On Password
Setting a power-on password helps protect information stored in your server. If a
power-on password is set for your server, the Power-On status icon is shown in the
locked position. If a power-on password is not set, then the Power-On status icon is
shown in the unlocked position (as shown in the screen above).
When you select the Entry icon, a screen with eight empty boxes displays. Type
your password in these boxes. You can use any combination of up to eight
characters (A–Z, a–z, and 0–9) for your password. As you type a character, a key
appears in the box.
Chapter 3. Using System Management Services 3-11