beautypg.com

IBM B50 User Manual

Page 156

background image

Step 5. Stopping the Diagnostics

1. If you are running Online diagnostics, shut down the system, using the following

procedure:

a. Press the 3 key repeatedly until you get to the Diagnostic Operating

Instructions, then follow the displayed instructions.

b. Press the 3 key once, and then follow the displayed instructions to shut down

the system.

2. If you changed any attributes on your ASCII terminal to run the diagnostics,

change the settings back to normal.

3. This completes the system verification. Report the SRN if you received one to

the service organization. To do a normal boot, turn off the system unit and wait
30 seconds, and then turn the system power on.

7-4

7046 Model B50 User's Guide