IBM B50 - Manual (Page 112)

Removing Memory Modules
Before you begin:
Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive
Devices” on page 4-3.
Remove the server cover (see “Removing the Cover” on page 4-4).
1. Locate the memory module connectors on the system board.
The memory module connectors are shown in the following figure.
2. Remove any adapters that are blocking the memory module connectors (see
“Removing Adapters” on page 4-26).
3. Determine which memory modules you want to remove.
4-20 7046 Model B50 User's Guide