Paper loading path – IBM TM7 User Manual
Page 88
4. Pull the end of the paper up over the paper roll and toward the back of the
printer.
Note: Refer to the label on the inside of the bottom cover for a diagram of how
to load paper.
5. Close the paper cover.
6. Press the customer receipt feed button to advance the paper and verify that the
paper is feeding correctly. Feed 30 cm (about 1 ft) of paper through to test for
correct alignment.
Paper roll
Top cover
Sphere
Metal
Spring
Bucket
Figure 28. Paper Loading Path
updated March 18, 2002
64
SureMark DBCS User’s Guide