Station characteristics 9. sound characteristics – IBM TM7 User Manual
Page 102
Table 8. Station Characteristics
Characteristic
Customer Receipt Station
Document Insert Station
Speed (see note
following table)
SBCS characters: 39.2 lps at 6 lpi,
SBCS characters: 52 lps at 8 lpi
DBCS characters: 50 lps at 7.7 lpi
4.3 lps
Paper Width
TI5/TG5 – 80 mm (3.15 in.)
TF7/TM7 – 90 mm (3.54 in.)
Print Width (Resident
Code Page)
34 SBCS characters at 12 cpi,
44 SBCS characters at 15 cpi,
48 SBCS characters at 17 cpi,
57 characters at 20 cpi
37 SBCS characters at 12 cpi,
47 SBCS characters at 15 cpi,
52 SBCS characters at 17 cpi
Print Width (DBCS
Code Page)
38 SBCS characters per line
19 DBCS characters per line
Korea:
43 SBCS characters per line
21 DBCS characters per line
Others:
24 SBCS characters per line
12 DBCS characters per line
Pitch (Resident SBCS
Code Page)
12, 15, 17, 20 cpi
12, 15, 17 cpi
Note: In order to conserve power, SureMark models TI5, TG5, TF7, and TM7
reduce their throughput when printing high print densities, such as logo
messages or full black lines. Because these types of print messages are
used on a limited basis, the overall performance when printing a customer
receipt is not noticeably affected.
The reduced print speed is based on the number of print dots that are turned
on for a given print line, which is defined as dot utilization. Dot utilization is
typically low for normal character printing and up to 100% for full black line
printing. The SureMark printer operates at 52 lps at low dot utilization, and at
slower speeds as the dot utilization increases.
Table 9. Sound Characteristics
Type
Description
LwAd
LpAm
Operating
(bels)
Idling (bels) Operating
(dB)
Idling (dB)
Operating
(dB)
Idling (dB)
SureMark
TI5
Printer
5.7
N/A
61.5
N/A
47
N/A
Notes:
LwAd The declared upper limit of the sound power level for a random sample of
machines.
LpAm The mean value of the A-weighted sound pressure levels at the operator
position (if any) for a random sample of machines.
The mean value of the A-weighted sound pressure levels at the one-meter
(bystander) positions for a random sample of machines.
N/A
Indicates not applicable.
All measurements were made in accordance with ISO 7779 and reported in
conformance with ISO 9296.
updated March 18, 2002
78
SureMark DBCS User’s Guide