IBM TM7 - Manual (Page 152)

n=00 Cancel Invert Mode
n=01 Set Invert Mode
Default:
n = 00
Remarks:
This is valid in the customer receipt station only.
Set or Cancel Emphasized Printing
RS-232 Syntax:
ESC G n or X'1B;47;n'
where:
n=00 Cancel Emphasized Mode
n=01 Set Emphasized Mode
Default:
n = 00
Remarks:
This must be at the beginning of a print-line in the document portrait station.
It is enabled for the entire line.
Set or Cancel High Quality Print Mode
RS-485 Syntax:
X'1B;2F;n'
RS-232 Syntax:
ESC n or X'1B;2F;n'
where:
n=00 Cancel high quality mode
n=01 Set high quality mode
Default:
n = 00
Remarks:
When high quality mode is set, the printing will slow down to one-half speed
in the cash receipt station. The slower speed increases the quality of the
printing.
Set Print Station
RS-232 Syntax:
ESC c 0 n or X'1B;6330;n'
where:
n Specifies the print station.
Bit # ↓ Station
LSB 0 Reserved
1 Customer Receipt Station
2 Document Station - Portrait Mode
3 Document Station - Landscape Mode
updated March 18, 2002
128 SureMark DBCS User’s Guide