IBM TM7 - Manual (Page 162)

Setting Default Value
Print mode 00
Print station selected 02
User-defined/resident character sets 01
Code page 02
Intercharacter spacing (SB) 03
Rotated characters 00
Station for line spacing 02
Line spacing all stations Six LPI
Tab positions Every 100 dots
Left margin 00
Relative position 00
Align positions 00
Unidirectional printing 00
Horizontal size of bar code 03
Vertical size of bar code A2
Position of HR 00
Font for HRI 00
Error Conditions:
None
Enable or Disable the Feed Buttons (Models TI5 and TG5 Only)
RS-485 Syntax:
X'1B;63;35;n'
RS-232 Syntax:
ESC c 5 n or X'1B;63;35;n'
where:
n=0 Enables feed buttons
n=1 Disables feed buttons
Default:
n = 0
Purpose:
To disable the feed buttons while in the middle of a transaction.
Remarks:
If the printer is set to have the buttons disabled, the offline tests will also be
disabled.
Enable or Disable the Beeper (Models TF7 and TM7 Only)
RS-232 Syntax:
ESC BEL n1 n2 or X'1B 07 n1 n2'
where:
n1 Enables or disables beeper.
X'00' Disable beeper.
X'01'–X'FE'
Timed enable beeper.
X'FF' Enable beeper.
updated March 18, 2002
138 SureMark DBCS User’s Guide