IBM TM7 - Manual (Page 49)

USB Communication Mode
No switches or special commands are required for USB communication. With the
USB interface card and cables in place, the system automatically detects the printer
when it is attached and performs any necessary setup. The printer operates at data
rates up to 12 Mbps.
USB Selection
Universal serial bus (USB) is an industry standard communication interface. It is
used to attach devices, such as printers, displays, and keyboards, to personal
computers or IBM POS systems that have USB ports. The standard USB port (with
a power brick) is used to attach the SureMark to personal computers. The powered
USB port is used to attach the SureMark to IBM POS systems. See Figure 8 on
page 15 for the thermal/impact SureMark printers and Figure 9 on page 16 for the
single-station SureMark printers.
updated March 18, 2002
Chapter 2. Installation Instructions 25
|
|
|
|
|