IBM TM7 - Manual (Page 119)

– For SBCS code pages 932, 950, 1381: 8 full-dot wide character + 3 half-dot
space
Font A: 150 half-dots per inch
⇒ 24 characters per line
Font B: 120 half-dots per inch
⇒ 19 characters per line
You can choose the character size of the one user-defined character set (code
page) within the following parameters:
v 4 ≤ half-dot width ≤ 16
v 4 ≤ dot height ≤ 16
Notes:
1. Any of the impact printing fonts can be printed double-wide, double-high, or both
double-wide and double-high. For better print quality with double-high
characters, set the printer to unidirectional print mode. See “Set or Cancel
Unidirectional Printing” on page 135.
2. User-defined characters greater than 9 dots high cannot be printed in landscape
mode.
3. The document print line is 80.35 mm (3.16 inches) long. There are 474 half-dots
per line for font A, and 379 half-dots per line for font B.
4. You can print in two densities on the impact printer: 120 half-dots per inch or
150 half-dots per inch. Refer to the description of bits 0 and 1 in “Set Print
Mode” on page 125 for information about changing the density.
updated March 18, 2002
Appendix B. Technical Information 95