Motorola SSETM 5000 - Manual (Page 65)

6881094C12-A November 11, 2004
Performance Checks: Radio Test Mode 4-3
NOTE: All displays are temporary and will expire without any user intervention. If
information is longer than the physical length of the radio’s display, the information
will wrap around to the next display.
3. Do one of the following:
• Press the green button on the control top to stop the displays and enter the RF test mode.
The test mode menu option “1 CSQ” is displayed, indicating test frequency 1, Carrier
SQuelch mode.
See Section 4.2.2: “RF Test Mode” on page 4-4 .
OR
• Press the top side button to stop the displays and select the control top test mode. The
test mode menu option “CH TEST” is displayed, indicating that you have selected the
control top test mode.
See Section 4.2.3: “Control Top Test Mode” on page 4-5 .
NOTE: Each press of the top side button toggles between “CH TEST” and “RF TEST”.
Table 4-2. Test-Mode Displays
Display Description Appears
SERVICE The radio has entered test mode. Always
HOST VER , followed
by the version number
The version of host firmware Always
DSP VER , followed by
the version number
The version of DSP firmware Always
SECURE , followed by
the version number
The version of encryption firmware When the radio is secure
equipped
KG , followed by the
encryption type*
Type of encryption algorithm being used When the radio is secure
equipped and at least one
encryption algorithm is installed
(Model number) The radio’s model number, as
programmed in the codeplug Always
(Serial number) The radio’s serial number, as programmed
in the codeplug Always
(ESN) The radio’s electronic serial number, as
programmed in the codeplug Always
(ROM size) The memory capacity of the host FLASH
part Always
FLASHCOD , followed
by the FLASH code(s)
The FLASH codes, as programmed in the
codeplug Always
UHFL The RF band in which the radio operates Always
Tuning Version The default tuning data version Always
Processor Version The processor type and ROM version Always
RF TEST The radio has completed test mode. Always
* There is a KG display for as many algorithms as are installed in the radio. If there
are no encryption algorithms installed, the radio displays “KGNONE” during the test-
mode display sequence.