Motorola SSETM 5000 - Manual (Page 19)

6881094C12-A November 11, 2004
Radio Description: SSE 5000 UHF Range 2 (450–488 MHz) Model Chart 1-3
1.4 SSE 5000 UHF Range 2 (450–488 MHz) Model Chart
MODEL NUMBER DESCRIPTION
H10SDD9PW6AN UHF Range 2 (450–488 MHz), 2–5 Watts, SSE 5000
ITEM NUMBER DESCRIPTION
X — Antenna, UHF (Refer to Section A.1: “Antennas” on page A-1 )
X — Battery (Refer to Section A.2: “Batteries” on page A-1 )
X NUE7337_ Board, Transceiver, UHF Range 2 (450–488 MHz)
X NCN6186_ Board, VOCON *
X — Cable, Programming (Refer to Section A.8: “Programming Cables” on page A-2 )
X — Case, Carrying (Refer to Section A.3: “Carrying Accessories” on page A-1 )
X — Charger (Refer to Section A.4: “Chargers and Charger Accessories” on page A-1 )
X NTN7061_ Cover, Accessory Connector
X NNTN4709_ Kit, Belt Clip
X NNTN4825_ Kit, Chassis, Back
X NNTN4826_ Kit, Chassis, Front
X 8485687E01 Kit, Control Flex
X NNTN4468_ Kit, Hardware
X NNTN4467_ Kit, Housing
X 8485791E01 Kit, Speaker Mic Flex
X — Mic Accessories (Refer to Section A.7: “Microphones and Microphone Accessories” on page A-2 )
X NNTN4006_ Module, Encryption, DES, DES-XL, DES-PFB
X X — Surveillance Accessories (Refer to Section A.9: “Surveillance Accessories” on page A-2 )
Notes:
X = Item Included
* = When ordering a VOCON board, you will be asked to provide the radio's model number, FLASHcode, host
code, and DSP code. You can find this information as follows:
• For the radio model number and FLASHcode, place the radio in test mode (see Section 4.2: “Radio Test
Mode” on page 4-2 ) and view the scrolling displays.
• For the host code and DSP code, read the radio using the programming cable (RKN4121_ or RKN4122_)
and view the information in the CPS.