Motorola Cell Phon - Manual (Page 32)

32
Placing a Call
To place a call:
1. Power the phone on by pressing and holding
P
until the display appears and you hear
an audible alert.
2. Enter the number you want to call.
• Press
c
to erase one digit at a time if
you make a mistake.
• Press and hold
c
to clear the entire
entry.
You can also recall a previously dialed or
stored number. (See “Using Phone Memory”
on page 36 for details on storing or recalling.)
3. Press and hold
= until you hear two tones.
You see Dialing XXX, where XXX is the
number you are calling.
or
Press
S
to place the call. You hear a single-
tone alert (if the keypad tones are turned on)
and see Dialing
XXX, where XXX is the
number you are calling.
You can dial phone numbers with up to 32 digits,
but only the last 20 digits appear in the display.
Press
r
to see the entire phone number.