MITSUBISHI ELECTRIC CP700E - Manual (Page 8)

7
3
Installing print paper and ink sheet
1
Installation procedure of print paper
1 Move the knob on the printing unit to the direction indicated by the arrow.
2 Insert the print paper in the position as shown below.
Place the gear to the right side.
Right side Left side
• Set the paper roll first on the right side paper holder.
• Set the paper roll on the left side paper holder.
3 Insert the print paper between roller 1 and 2.
4 Insert the edge of the print paper to roller 3.
Be sure to insert the paper straight.
5 Feed the print paper through the exit slot straight with your hand.
6 Pull the print paper to eliminate slack.
7 Move the knob on the side of the printing unit to the direction as
indicated by the arrow.
3. Preparations before operation
Print paper
Folder
Insert
Folder
Print paper
Roller Roller Roller
Paper Paper Paper
INCORRECT CORRECT INCORRECT
1 Roller
2 Roller
3 Roller
Print paper